Replacing Batteries In The Remote - HunterDouglas PowerView Pebble Manual

Replacing batteries in the remote

Replacing the batteries in the remote module will not cause the
loss of any window covering programming, including GROUPS
and FAVORITE. The remote uses two CR 2032 batteries.
1.
For the Pebble
indentation, gently lift and remove the remote module
from the Pebble. For the Surface Remote, remove the
Surface from its mounting plate by twisting the Surface
counter-clockwise. Push the remote module out from
the back of the Surface.
28
® Remote, slide your thumb in the
2.
Rotate the back cover of the remote module
clockwise to unlock.
3.
Remove the back cover from the remote module.
29