Addressing; Addressing Buttons; Addressing Rules; Setting Up Keypad Buttons Address - Black Box ControlBridge CB-KEYPAD-208-T User Manual

CHAPTER 5: ADDRESSING

5.1 ADDRESSING BUTTONS

5.1.1 ADDRESSING RULES

The ADDRESS of the buttons and LEDs of the keypad can be set in the range 0 to 207. The default button panel ADDRESS is 1.
The BUTTON_ID transmitted by the panel is the LINK number used in the programming for button identification. The BUTTON_
LED_ID is LED identification for ButtonLed commands. Both values depend on the button (LED) position and on a keyboard
ADDRESS too. BUTTON_ID is calculated according to the formulas described below.
BUTTON_ ID = (32 * ADDRESS) + Button Code
BUTTON_LED_ID = (32 * ADDRESS) + Button LED Code
The lowest BUTTON_ID is generated by the button in the upper left corner; the highest BUTTON_ID is generated by the button in the
lower right corner.
In the table below, Button ID range for some addresses is shown.
TABLE 5-1. BUTTON ID RANGE
ADDRESS BUTTON_ID RANGE
0 1
1 33
2 65
...
207 6625
8
Button LED Code = 1
Button Code = 1
FIGURE 5-1. BUTTON ID RANGE
BUTTON_LED_ID RANGE
8
40
72.
6632
1.877.877.2269
Button LED Code = 8
Button Code = 8
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269