Table of Contents
Advertisement
CHAPTER 4: BUTTON LABELS
2. Clean and degrease the rear glossy part of engraved strips using denatured alcohol.
3. Remove the release liner from the top part of the keypad.
4. Place the engraved front panel on the keypad, make sure that the buttons can be pushed easily and then press the panel to stick to
the keypad.
NOTE: Be as precise as possible, because it is very difficult to remove the panel once it has been glued.
FIGURE 4-2. KEYPAD
1.877.877.2269
BLACKBOX.COM
Release liner
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
7
Advertisement
Table of Contents
