Troubleshooting; Addressing The Built-In Ir Receiver; Addressing Rules - Black Box ControlBridge CB-KEYPAD-208-T User Manual

CHAPTER 5: ADDRESSING

5.1.3 TROUBLESHOOTING

Flashing backlight LEDs indicate a non-volatile memory ERROR. Try the Power OFF – Power ON sequence to restart the device and
set the ADDRESS again.

5.2 ADDRESSING THE BUILT-IN IR RECEIVER

5.2.1 ADDRESSING RULES

You can add an offset to a BUTTON_ID sent by the control panel using the IR receiver built into the keypad. It can be very helpful in
multi-room installation—the same ControlBridge can be identified in each room. That means one panel can initiate different actions
in different rooms—see an example in the picture on the next page.
10
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269