Schedules; Display; Calibrate Sensors - Trane NEXIA XR724 User's Manual And Installation Instructions

USER SETTINGS continued
The following is a guide of the menu options available by pressing the Menu button. Certain menu selections, which
are marked by an asterisk ( * ), may or may not be present depending on other menu settings.

SCHEDULES

Setting
ESM Heat Setpoint*
ESM Cooling Setpoint*
Edit Schedule*
Copy Schedule*
Smart Recovery*
Once all selections have been made, press the Done button to exit and return to menu. Press Next to navigate to the next setting.

DISPLAY

Setting
Backlight On
Backlight Off
Display Lock
Once all selections have been made, press the Done button to exit and return to menu. Press Next to navigate to the next setting.

CALIBRATE SENSORS

Setting
Sensor Cal
Remote Sensor Cal*
ODT Sensor Cal*
RH Cal
Once all selections have been made, press the Done button to exit and return to menu. Press Next to navigate to the next setting.
18-HD82D1-1B-EN
XR724 USER GUIDE
Range / Sub Settings
55 - 90 degrees [62]
60 - 99 degrees [85]
Select Day (use Back/Next)
Wake Period
Day Period
Eve Period
Night Period
Copy from (use Back/Next)
Select day to copy
Copy (day selected) To
Yes, [No]
Range
0 - [100] percent
[0] - 100 percent
[Unlocked], Display lock
Range
+/- 7 degrees (F or C) [0 deg]
+/- 7 degrees (F or C) [0 deg]
+/- 7 degrees (F or C) [0 deg]
+/- 7 % [0 %]
Description / Range of Sub Settings
Select the desired Heating Setpoint when ESM (Energy Savings Mode)
is selected
Select the desired Cooling Setpoint when ESM is selected
This section is done for each day
Set Time [6:00 am]
Heat Setpoint 60˚- 90˚ [70]
Cool Setpoint 60˚- 90˚ [78]
Set Time [8:00 am]
Heat Setpoint 60˚- 90˚ [62]
Cool Setpoint 60˚- 90˚ [85]
Set Time [6:00 pm]
Heat Setpoint 60˚- 90˚ [70]
Cool Setpoint 60˚- 90˚ [78]
Set Time [10:00 pm]
Heat Setpoint 60˚- 90˚ [62]
Cool Setpoint 60˚- 90˚ [78]
Copy selected day to current schedule period.
Select the screen brightness level when the backlight is lit
Select the screen brightness level when the backlight timeout expires
Select security level
• Unlocked - Enables selection of all menus and settings
• Display Lock - Disables selection of all menus and settings
Note: When Display Lock is selected a lock icon will appear next to the
up arrow.
Note: To disable Display Lock, press and hold the Menu button 5 seconds
until the lock icon disappears.
Calibrate the internal temperature sensor (1˚ in F = 2˚ in C)
Calibrate an attached remote sensor
Calibrate an attached outdoor sensor
Calibrate the internal humidity sensor
Description
Description
5