Table of Contents
Advertisement
8.
BATTERY AND RECHARGE
During its operation, the system alerts the user when the battery is running down. The top LEDs start to flash to
indicate that the battery is in "RESERVE" mode.
8.1.
Recharging the system
Fig. 12
N.B.: In case you don't plan to use the N-Com system for a long time, you need to fully recharge the device before
storing it away.
N.B.: In case the device is not used for a long time, carry out a complete recharging cycle of the device at least once
every 6 months to avoid possible damage to the battery.
N.B.: In case the N-Com system is left for more than 6 months without ever being recharged, the device may not
switch on; in this case, recharge the N-Com system for at least 24 hours (even if the blue signalling LED is not
flashing), then try to switch on the device again.
• To charge the system, hook it up to a USB outlet
powered with the USB-mini USB cable supplied as
standard equipment.
• During the charge, the LEDs of the ESS system flash.
• The LEDs turn off once the battery has been charged.
ESS
19
Advertisement
Table of Contents
Need help?
Do you have a question about the N-Com R Series and is the answer not in the manual?