Table of Contents
Advertisement
EN
Switching on
Switching off
N.B.: It is recommended to turn off the ESS system on the Rider helmet in case of a passenger.
4.1.
Auto On / Off function
The system does not have to be turned on and off every time you use the motorcycle: thanks to the triaxial
accelerometer, if the helmet does no move for more than 60 seconds, the ESS system goes into "deep sleep" mode.
The system is completely turned on as soon as movement is detected, going back to the mode it was in before.
16
Press the Function key until the LED turns on. Every time it is turned on, the system positions
itself in mode 1.
To switch off the system, put it in mode
switch from one mode to the other. Switch off is confirmed by the upper LED flashing 4
times.
. Briefly press the Function key and release it to
Advertisement
Table of Contents
Need help?
Do you have a question about the N-Com R Series and is the answer not in the manual?