Table of Contents
Advertisement
EN
3.1.
Positioning the ESS adapter
Fig. 2
Fig. 3
10
The ESS adapter must only be used for installations on
N104, N44 and N40 helmets.
The installation of the ESS system on helmets other than
the ones indicated above does not require the use of any
adapter.
• Select the specific adapter for your helmet (the
compatible helmet model is shown on the back of the
support).
• Remove the protective film from the double-sided
adhesive tape located in the rear of the system ESS (Fig.
2).
• Apply the double-sided adhesive tape supplied as
standard equipment to the selected plastic adaptor
(Fig. 3).
Advertisement
Table of Contents
Need help?
Do you have a question about the N-Com R Series and is the answer not in the manual?