Table of Contents
Advertisement
Interface Connectors
1
Figure 2: Bottom Connectors
# Connector
LAN(PoE)
Gigabit RJ-45 port for data and
1
Port
Power over Ethernet (PoE).
Press and hold for 10 seconds to
2
Reset
factory reset the device.
Console port to connect to the
Console
3
DBA-3621P using a RJ-45 to serial
Port
cable.
Table 2: Interface Description
1
Figure 3: Rear Connectors
2
2
3
Description
Label Area
2
# Connector
Wall/Pole
Mount to connect to the mounting
1
Mount
plate on a wall or a pole.
Grounding
Connector for the grounding wire.
2
Wire
Table 3: Interface Description
Installation
Using Power over Ethernet (PoE)
1.
Use a standard Ethernet cable to connect
the LAN1(PoE) port on the DBA-3621P
to a PoE power source device such as
an 802.3af or 802.3at PoE switch or PoE
injector.
Configuration
Using Nuclias Cloud
The DBA-3621P is designed to be managed
through the Nuclias Cloud. Refer to the Nuclias
Cloud Manual for detailed configuration
instructions. To use Nuclias Cloud, your device
must be connected to the Internet.
Note: D-Link recommends manually configuring
the device before mounting it.
Nuclias Cloud App Configuration
1.
Download the free Nuclias Cloud app from
the App Store or Google Play by searching
for Nuclias Cloud.
2.
Open the Nuclias Cloud app and follow
the onscreen instructions to discover and
set up your device.
Nuclias Cloud Web Configuration
DBA-3621P Quick Installation Guide
Description
Advertisement
Table of Contents
