Handling, Transportation And Storage; Handling; Long Term Storage; Reshipping The Instrument - Observator Instruments OMC-150 Manual

5

Handling, transportation and storage

5.1 Handling

Keep the instrument in the protective Styrofoam package until installation. Care should be taken not to
damage the cup unit the vane unit. Take care that the small mounting materials will not be lost.
Once the installed, store the packing for later use (see section 5.3)

5.2 Long term storage

When not in use, store the OMC-150 anemometer in a dry place. Note that this is required, as the system
is only weatherproof when mounted in an upright position while the electrical plug is mated.

5.3 Reshipping the instrument

Whenever the OMC-150 anemometer is shipped, e.g. for calibration or repair, it should be shipped in the
original packing. If this is no longer available on site, replacement packing can be ordered from
Observator instruments B.V. or one of their world-wide agents or resellers. For contact information please
refer to section 8.2.
If the anemometer is shipped for calibration, please also include the vane unit and cup units, as those
parts are required during calibration.
Manual | OMC-150
Page 13 | 38
Status: Final | Not confidential
V2.13