Table of Contents
Advertisement
seconds), all setup settings will be saved.
If this is a battery replacement and the battery was
not replaced within the time limit (30 seconds), the
time and date settings may be lost. The software
version and the default date and time will appear for
3 seconds. Go to setup to configure the meter.
Set the Time
1. Press the MODE
meter if in Sleep Mode wakes up and enters the SETUP
Mode.
2. Select the hour (flashing) format: either 12 Hr or 24 Hr. Press
the Right/Left Arrow
2 time format options.
20
Setup
button for longer than 3 seconds. The
buttons to toggle between the
Hide quick links:
Advertisement
Table of Contents
