HBD-TZ140
2-5.
FRONT CABINET BLOCK
Wire e i
Bring the slack part to the front side.
CONTROL board
POWER board
wire tie
MAIN board
wire tie
This portion must not touch the tray.
Check that this portion is not slack.
This portion must not touch the POWER board.
6 front cabinet block
10
DVD mechanism deck
(CMS-S76RFS3G)
tray
4 claw
5 seven claws
1 Cut two wire ties.
Note: In reassembling, use new wire tie
to fasten the clamp same as before.
3 connector
(CN203)
2 connector
(CN202)
– e r ri
ie
–