Special Warnings - Quick MILL Professional 05000A Operating Instructions Manual

Istruzioni 05000 A 2-08-2011
Mod. 05000A "Professional"
7. Before you carry out any cleaning or maintenance work on the appliance, make sure to switch it Off and to disconnect the
plug.
ATTENTION
8. In case of failure or malfunctioning do not tamper with the appliance and turn exclusively to a Service Centre authorised
by QUICK MILL, requesting only use of original parts. If this rule is not respected, safety should be impaired and normally
the warranty would automatically become void.
9. If you decide to stop the use of the machine, be sure that it is no more working by cutting the power cable after having
disconnected the plug from the socket. We recommend to put the components which can be dangerous for children, out of
action.

SPECIAL WARNINGS

1. The installation has to be done according to manufacturer's instructions. A wrong installation can cause damages to people,
animals or things and the manufacturer cannot be held responsible for them.
2. The electrical safety of this apparatus is guaranteed only if the same is correctly connected to an efficient earthed system
as foreseen by the actual electrical safety rules. It is necessary to verify the fundamental safety requirements and, in doubt,
ask for an accurate system control by qualified technicians. The manufacturer cannot be held responsible for any damages
caused by unearthed system.
ATTENTION
3. In order to avoid dangerous overheatings, we recommend to unwind completely the power supply cable.
4. Don't leave the apparatus plugged when it is not used.
5. Don't obstruct the cooling openings.
QUICK MILL
8:44 Pagina 15
GB
15