Download Print this page

Quechua Geonaute KEYMAZE 500 HIKE Manual page 4

Advertisement

3/ USB connection
Charging and the datas transfer is done via USB cable
The full charging time is estimated at 3h30min
DATA TRANSFER WITH THE PC
o
RELOAD OF THE DEVICE
o
a) Remove the cap marked with the "USB" icon at the top of the KEYMAZE.
b) Plug in the connector provided.
c) Plug the other end into one of your computer's USB ports.
4/ Technical information
General Electrical and Mechanical Parameters
Item
Number of Waypoints:
Tracking point:
Display Size:
Display type:
Pixels (H x W):
Unit Weight:
Waterproof Standard:
Unit Size:
Backlight Display:
Operating temperature:
Humidity:
Voltage:
Cable:
Battery:
E-Compass:
Barometer:
Battery life:
ANT+ RF:
GPS antenna:
GPS chip:
Autonomy:
16 hours
Charging time :
3h30min
Reference
  

  
 
KM500
100
20hrs (2s/point)
Active Area : 32.37 * 21.59 View Area : 35.30 * 24.34
(H x W in mm.)
4 Grayscales colors
128 x 96 Pixels
61g
IPX7
50.6 x 66.7 x 17.1 (L x D (Φ) x H in mm.)
Single level (White light)
-10 ° to 60 ° C
5% to 95% Non-condensing
3.7V for a rechargeable battery 5V for charging input.
DIN 4 cable
Rechargeable 800mAh Lithium ion polymer
+/-5 degree, 2Axis Yamaha
Yes
GPS 3D fix, Backlight off – 15 hours (estimated) GPS
3D fix, Backlight on – 11 hrs (estimated)
NO
Patch antenna
SiRF Star III LPx
Sealing :
IPX7 (submersible to
1 meter deep for 30
minutes)
Version Number
KM700
100
30hrs (2s/point)
YES (ANT+Sport Protocol)
Precision position:
Satellite time :
+/- 5 M with good
Less than 1 minute
satelittes reception

Advertisement

loading

This manual is also suitable for:

Geonaute keymaze 700 trailKm500Km700