Advertisement
FREE ROUTE
1/ Session Set up
LAP
(only available on KEYMAZE 700 version)
your session information at regular intervals. This data can then be viewed later using GEONAUTE
SOFTWARE.
AUTO – the GPS will record a lap time at each change of section (change between an
ascent and a flat section or a descent)
DISTANCE – The lap time is set according to the distance
OFF – lap time is off
Should you select AUTO or DISTANCE, a window appears at the end of each lap,
displaying the information for that lap, while you exercise.
ARRIVAL
KEYMAZE helps you to manage the timing of your exercise
BEFORE SUNSET - An alert warns you of sunset
BEFORE A TIME - Set an arrival time and you will get an alert one hour earlier
FREE– No alert. You manage your timing yourself
SAMPLING RATE
Sampling sets the frequency with which the Keymaze records information. The shorter the sampling
time, the more accurate the data will be and, consequently, the shorter the recording time will be.
Setting at 1/2/5 or 10 seconds
This will change the accuracy of the tracks recorded in the Geonaute software.
ZONE
This parameter helps you stick to a preset pace throughout your session. The KEYMAZE will warn you
if you exceed the preset limits, so that you can monitor effort levels during your exercise.
Reference
There are two GPS function modes that are built in to the
KEYMAZE: the Free route and the Guided route.
The first mode allows the user to practise his sport freely and
record the session with the GEONAUTE SOFTWARE and analyse
the route, the information (speed, altitude, ascent/descent...) or
even the heart rate (KM700)
There are several steps you have to go through to
configure your session before starting an exercise.
: The lap time allows you to memorise and display
Version Number
Advertisement
