Table Of Contents - r.LiNK RL4-SY3-R5 Manual

Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the compatibility of vehicle and accessories
1.3. Connectors - video interface
1.4. Dip switch settings
1.4.1. 8 dip - black
1.4.1.1. Activating the front camera input (dip 1)
1.4.1.2. Enabling the interface's video inputs (dip 2-3)
1.4.1.3. Activation of the Interface PDC Graphic (Dip 4)
1.4.1.4. Rear-view camera setting (dip 5)
1.4.1.5. Activating the guide lines (dip6)
1.4.1.6. Monitor selection (Dip 7)
1.4.2. 4 dip - red
2. Installation
2.1. Place of installation
2.2. Connection schema
2.3. Connection - picture signal cable
2.4. Connection - PNP Power / CAN cable
2.4.1. Sync3 light-version
2.4.2. Sync3 full version as ALL-IN-ONE head-unit
2.4.3. Sync3 full version with separate APIM module
2.5. Power supply
2.6. Power supply output
3. Connection - video sources
3.1. Audio insertion
3.2. After market front camera
3.3. After-market rear-view camera
3.3.1. Case 1: Interface receives the reverse gear signal
3.3.2. Case 2: Interface does not receive the reverse gear signal
3.4. Connection video-interface and keypad
3.5. Picture settings
4. Interface operation
4.1. By infotainment button
4.2. By keypad
5. Specifications
6. FAQ - Trouble Shooting-Interface functions
7. Technical support
Version 09.12.2020 HW: CAM(V100)/(V11+V41) ab Serien Nr: NZ20NOV694 RL4-SY3-R5