Configuring The Vmm6; Figure 7 - Nmea 2000 Connectors - Maretron VMM6 Series User Manual

___________________________________________________________
Please refer to the Maretron website
products.
The VMM6 transmits data over an NMEA 2000
default device instance is "Instance 51". The default data instance whose state is reflected by the
LED's on the VMM6 is "Instance 32". The unit will pair with Maretron CLMD12 and CLMD16 to
toggle each unit's first 6 ECB's ON and OFF. If more than one CLMD12, CLMD16 or one of each
unit is on the same NMEA 2000® network the VMM6 unit will have to be configured. Depending
on desired switch control, default configuration may not work for your application and custom
configuration will be needed. The VMM6 is configured using Maretron N2KAnalyzer
following sections describe the configurable parameters of the VMM6.
VMM6 User's Manual Rev.1.1

Figure 7 - NMEA 2000 Connectors

(www.maretron.com/products/cabling.php

Configuring the VMM6

®
network as it is shipped from the factory. The
) for relevant
®
. The
8