Page 3
The VMM6 features 6 of Carling's Contura® rocker switches available in different styles. The VMM6 requires only a connection to an NMEA 2000® network to begin. Configure the VMM6 using Maretron N2KAnalyzer® installed on a PC and an IPG100 or USB100 connected to the NMEA 2000® Network.
Page 4
UNIT: INCH [MM] VMM6 Application: Apply the VMM6 unit to control any Maretron Load Controller device such as Maretron's CLMD16 orCLMD12 by connecting VMM6 to the same NMEA 2000® Network. The VMM6's Out of Box Configurationallows for Toggle Operation of the first 6 or 7 (depending on part number) Electronic Circuit Breakers onMaretron's CLMD16 and CLMD12 DC Load Controller Modules.
Page 6
Installation Principle: MARETRON CLMD12 MARETRON VMM6 MORE INFO 12 Channel DC Load Module Model: CLMD12 P/N: M000000 6.5-32VDC 50mA NMEA 2000 LEN: 1 BARCODE S/N: 0000000 MARETRON CLMD16 16 Channel DC Load Module OVERRIDE DIAG CAN-A CAN-B Connect VMM6 Using VMM to...
Page 7
The VMM6's default configuration will Toggle the first 6 or 7 (Depending on model number) Electronic Circuit Breakers of either CLMD16 or CLMD12 when connected to the same NMEA 2000® Network. MARETRON CLMD16 MARETRON CLMD12 16 Channel DC Load Module...
Page 8
Not to Scale, for Reference Only 6.09 [ 154.69 ] R 0.12 [ 3.05 ] 1.86 [ 47.24 ] MINIMUM PANEL THICKNESS: 0.06 [1.57] UNIT: INCH [MM] Page 6 1 P/N: M003140409 Rev. 1.22...
VMM6 For Additional Information About Your VMM6 Scan this QR Code: Technical Support: If you require technical support for Maretron products, you can reach us in any of the following ways: Telephone: 1-866-550-9100 Fax: 1-602-861-1777 E-mail: marine.support@carlingtech.com World Wide Web: https://www.maretron.com Mail: Carling Technologies, Inc.