Setting The Optimal Resolution; External Controls; Osd Settings - AOC 831S User Manual

Setting the Optimal Resolution

The recommended resolution for this monitor is 1366 by 768. To setup the monitor to this resolution, follow the steps below.
1. Click START.
2. Click SETTINGS.
3. Click CONTROL PANEL.
4. Double click DISPLAY.
5. Click SETTINGS.
6. Set the resolution SLIDE-BAR to 1366 by 768.

External Controls

Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure ). By
changing these settings, the picture can be adjusted to your personal preferences.
* The power cord should be connected.
* Press the power button to turn on the monitor. The power indicator will light up.
1 Eco mode (DCR) / -
2 4:3 or wide / +
3 Power
4 Auto / Exit
5 Menu / Enter

OSD Settings


Press the MENU-button to activate the OSD window.

Press+ or - to navigate through the functions. Once the desired function is highlighted, press the MENU-buttonto activate it.If
the function selected has a sub-menu, press or again to navigate through the sub-menu functions.Once the desired function is
highlighted, press MENU-button to activate it.

Press+ or - to change the settings of the selected function. To exit and save, select the exit function. If you want to adjust any
other function, repeat steps 2-3.

OSD Lock Function: To lock the OSD, press and hold the Menu button while the monitor is off and then press power button to
turn the monitor on. To un-lock the OSD - press and hold the Menu button while the monitor is off and then press power button
to turn the monitor on.

Eco Mode and DCR hot key : Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is
no OSD ( Eco mode hot key may not be available in all models).

4:3 or wide image ratio hot key: When there is no OSD, press + continuously to change 4:3 or wide image ratio. (If the product
screen size is 4:3 or input signal resolution is wide format, the hot key is disalbe to adjust.)