Silvercrest SPB5.2 A1 User Manual And Service Information page 52

SilverCrest SPB 5.2 A1
into the USB socket (1) of the Power Bank (A). If charging does not start
automatically, briefly press the Charge level/START button (3) to start the
charging process. Alternatively, you can also use the original charging cable of
the respective device manufacturer (USB port).
During the charging process, the LED display (2) gives you information about
the current charge level of the Power Bank (A). Briefly press the Charge
level/START button (3) to display the charge level (it is displayed for
approximately three seconds).
LED display
All LEDs on
Three LEDs on
Two LEDs on
One LED on
All LEDs off
Please note that the LED display gives only an approximate value of the actual
charge level of the Power Bank.
You can stop the charging process at any time by unplugging the USB
charging cable (B) or by pressing the Charge level/START (3) button for a
longer time period (approximately three seconds). To restart the charging
process, briefly press the Charge level/START button (3).
50 - English
Charge level
Approximately 100%
Approximately 75%
Approximately 50%
Approximately 25%
Approximately 0%