Troubleshooting - Silvercrest SBT 3.6 B1 Operating Instructions Manual

Troubleshooting

Problem
The appliance is
not working.
The appliance
only runs slowly.
The epilation of
the hairs is very
painful.
Not all hairs are
plucked.
│
■ 62 GB
Cause
The battery is empty.
The appliance is
defective.
The battery is empty.
The hairs may be too
long.
It is possible that the
hairs are too short.
You are working too
fast.
Solution
Charge the battery.
Contact the Customer Service
department.
Charge the battery.
Shorten the hairs to about 0.3 - 0.5 cm.
See also the section "Tips and Tricks".
The hairs should have a length
of 0.3 - 0.5 cm.
Move the appliance more slowly over
your skin.
SBT 3.6 B1