Table of Contents
Advertisement
Once the bracket is hooked together and taking the weight of the cabinet you can replace the lower bolt.
Final adjustments can now be made. Horizontal (pan) adjustment is available by rotating the assembly on the vertical bolt. When you are
happy with the angle, the vertical securing bolt can be tightened. For WB8/6 use an M5 hex key and for WB10/12 use an M6 hex key.
Vertical (tilt) adjustment is made by adjusting the grub screw.
DDX USER GUIDE V1.0
Copyright © 2020 Martin Audio Ltd.
Tilt Angle
Grub Screw
11
Horizontal
Pivot Bolt
Vertical
Pivot Bolt
Once the vertical position is fixed the two horizontal bolts can
be tightened. This is best achieved by using a socket set with an
extender bar to reach the bolt heads.
DDX USER GUIDE
Advertisement
Table of Contents
