The next step is to attach the cabinet section of the bracket to the cabinet. This is the bracket with four countersunk fixing holes on a
square pattern with the horizontal bolt in the curved slot.
The rear of the cabinet has six countersunk bolts fitted designed
for use with the mounting brackets. For portrait mode remove
the lower four bolts, for landscape mode remove the middle four.
For landscape orientation use the four holes closest to the middle and attach the bracket at right angles to the cabinet.
You are now ready to fit the loudspeaker to the wall. Offer the loudspeaker up to the bracket so you can hook horizontal bolt in the curved
slot onto the notch on the ball bracket. Make sure that you follow appropriate safety measures if you are working at height such as using a
scaffold tower or lifting platform which allows you to safely use both hands for this.
DDX USER GUIDE V1.0
Copyright © 2020 Martin Audio Ltd.
Position the bracket over the required holes that suit the
orientation required and screw into place tightly using the bolts
removed from the cabinet.
10
DDX USER GUIDE