Installation - ALK CoPilot Truck Laptop 4 User Manual

Installation

NOTE: If you are updating from an older version of CoPilot
the older version first (see Uninstalling, p. 19). This is not required, however. CoPilot Truck |
Laptop 4 can be installed while another version of CoPilot remains on your computer.
1. To install CoPilot, first turn on your computer (and the external CD-ROM drive if
necessary). Have your Installation Product Key ready (it can be found on the front of
the printed Quick Start that came with your product). Do not lose this Product Key,
you will need it for installation and registration.
5. Follow the instructions, clicking Next to go from one screen to the next in the Installation
Wizard. As the installation proceeds, you will be given the choice to install CoPilot map
data. It is recommended that you install the Map Data to your hard drive. A full
installation of the data can require up to 700 MB of available space depending on which
region you're installing. If space is unavailable, you can run the program by inserting the
Data Disc into your CD-ROM drive after you open the CoPilot application. NOTE:
Once a region (for example, North America or Europe) is installed it cannot be changed.
2. Insert the CoPilot Install Disc into your
CD-ROM drive. The installation will start
automatically within a few seconds.
3. Choose a language (for example, "English
(United States)"), click OK, then follow the
Installation Wizard instructions.
4. After clicking Yes (twice) to accept the
License Agreement, enter your Installation
Product Key (see Step 1) when prompted,
then click Next.
- 15 -
®
, you may want to uninstall