Changing The Voice Option At Any Time - ALK CoPilot Truck Pocket PC User Manual

the pre-recorded option saves space
on your Pocket PC, but will give you
less detailed driving instructions. Click
Next to continue.
5. Next, you will be prompted to choose
an installation location on the Pocket
PC. The default location is the Pocket
PC main memory (click Yes). To install
to a storage card, click No, then
choose Storage card from the drop-
down pick list (recommended).
6. The installation to your Pocket PC will
take a few minutes. Check your Pocket
PC screen to determine when the
installation is complete.
7. When CoPilot has been installed
to your Pocket PC, you will be
prompted to begin the desktop/
laptop installation. Click Next and
follow the on-screen instructions.
8. As the desktop installation
proceeds, you will be given the
choice to install the CoPilot Truck
US Data to your hard drive. This
is the recommended option and
requires 700 MB of available space.
If you choose None, you will need
to insert the CoPilot Truck Data
Disk each time you download data
to your Pocket PC or use CoPilot
Truck for trip planning on your
desktop.
NOTE to Navman GPS Jacket Users: If you are using this software with the
Navman GPS Jacket (the jacket has the word NAVMAN molded into the back of it
and has a conical antenna), you must also install drivers for that jacket separately:
1. Insert the CoPilot Truck Install Disk into your CD-ROM drive.
2. Exit out of the Installation screen when it appears.
3. Open up My Computer, right-click on your CD-ROM drive and select
Explore from the pop-up menu.
4. Open the WinCE folder, then open the Legacy Drivers folder and copy
the file 3.1.1.COM.ALKNavman.arm.CAB to the My Documents
folder on your Pocket PC.
5. On your Pocket PC open File Explorer and go to My Device > My
Documents and single-tap the CAB file you just copied from your
computer. This will install the appropriate drivers.
6. You may have to unseat/reseat your iPAQ in the jacket in order for the
drivers to take effect.

Changing the Voice Option at Any Time

To change the voice CoPilot Truck uses from male to female or vice versa at any
time after installation, you must first delete CoPilot from your Pocket PC (see
Uninstalling a Previous Version, p. 5, for how to uninstall the application). Then re-
install CoPilot Truck to your Pocket PC, choosing only the Pocket PC Installation,
and when you are prompted to choose a voice option, make your selection.
1. Insert the Install Disk into your CD-ROM drive, follow instructions.
2. Make sure ONLY Pocket PC Installation is checked, click Next, and
select the voice option you want. Click Next again.
3. Click Yes to reinstall Pocket Speech.
4. Click No to reinstall CoPilot Truck.
5. Click Yes to install in the default directory if that's where you originally
installed. If you installed CoPilot Truck elsewhere, click No and choose the
appropriate location.
6. Tap OK on your Pocket PC to reinstall.
7. Tap Yes to All if prompted.
8. Click OK on your Desktop, then click Finish to complete the process.
- 7 -
9. When the installation is complete, a CoPilot
Truck icon will appear on your desktop or laptop.
You are now ready to start using CoPilot! For
software activation, see p. 9.
- 8 -