InVento 500810 Instruction Manual page 6

Preparation
1. Push the LOCK towards the direction shown to
release the transmitter (fig. 1)
2
1
3. Remove the screw on
the submarine base as
illustrated (fig. 3)
5. Insert and tighten the antenna to
the antenna hole on the transmitter as
illustrated (fig. 5)
2
1
POWER CHARGE
fig. 1
fig. 3
POWER CHARGE
fig. 5
6
2. Remove the cover and take
out the antenna (fig. 2)
2
4. Turn the four retaining
screws anticlockwise (fig. 4)
6. Use a Phillips screwdriver to open the battery
compartment cover. Insert 4 x AA batteries with the
correct polarity and replace the battery
compartment cover (fig. 6)
1
fig. 2
2
1
1
fig. 4
fig. 6