Operation - InVento 500810 Instruction Manual

7. Press one of the buttons. The power LED lights up (fig. 7)
8. Open the charger cover on the transmitter and take out the charging cable. Insert
the charging plug into the charging socket of the submarine (fig. 8). The charging LED
lights up to indicate the charging is in process (fig. 9). The charging LED will extinguish
after the submarine has been completely charged (charging lasts approximately 40
minutes). Operating time: approx. 5 minutes.
9. Charging by USB cable: Insert the USB plug into the USB port on your
computer and the charging plug into the charging socket on the submarine
(fig. 10). The charging LED lights up to indicate the charging is in process.
The charging LED will extinguish after the submarine has been completely
charged (charging lasts approximately 40 minutes).
Operating time: approx. 5 minutes.
1
10. Place submarine into the water and press any button on the
transmitter: Connection is established, if the submarine moves.
1
11. Charge submarine, if the seachlight LED is flashing (fig. 11)
1

Operation

Extend the transmitter´s antenna for better signal reception.
1. Press forward button: The
Submarine will dive forwards (fig. 12)
2. Press backward button:
The Submarine will surface
backwards (fig. 13)
3. Press left button: The Submarine
moves to the left (fig. 14)
4. Press right button: The Submarine
moves to the right (fig. 15)
Forward
POWER CHARGE
Backward
POWER CHARGE
POWER CHARGE
POWER CHARGE
POWER CHARGE
POWER CHARGE
fig. 8
POWER CHARGE
POWER CHARGE
fig. 12
POWER CHARGE
POWER CHARGE
POWER CHARGE
fig. 13
POWER CHARGE
POWER CHARGE
POWER CHARGE
POWER CHARGE
POWER CHARGE
fig. 14
Left
POWER CHARGE fig. 15
Right
POWER CHARGE
7
POWER CHARGE
POWER CHARGE
POWER CHARGE
fig. 7
POWER CHARGE
POWER CHARGE
POWER CHARGE
fig. 9
POWER CHARGE
POWER CHARGE
fig. 10
fig. 11