ADS Technologies USBAV-701 Release Notes

Ads technologies usbav-701 video capture: release note

Hide thumbs Also See for USBAV-701:

Table of Contents

Download this manual See also: Reference Manual, User Manual

CapWiz 3.6 Release Notes:

You must un-install the previous version of CapWiz before installing

version 3.6.

Un-Install the Current CapWiz Application:

1.) Un-install your old CapWiz and other related programs before installing version

3.6. To Begin removing the existing version - Go to Control Panel, Add/Remove

Programs/

Un-Install the following:

2.)

During Un-Install of CapWiz and CapWiz Master installer, select CUSTOM, and

then click "Select All" on every screen. This will give you the cleanest un-install

and fully clear the system registry of the previous installation.

3.) Once CapWiz application is un-installed, Perform the same instructions above for

the Ulead Straight-to-Disc SDK

4.) Restart the computer

1.) Download the CapWiz update. This will be a compressed or .zip file.

ADS Tech CapWiz V3.x CapWiz

ADS Tech CapWiz V3.x CapWiz Master Installer

Ulead Straight-to-Disc SDK

Table of Contents

Do you have a question about the USBAV-701 and is the answer not in the manual?

Page 1 CapWiz 3.6 Release Notes: You must un-install the previous version of CapWiz before installing version 3.6. Un-Install the Current CapWiz Application: 1.) Un-install your old CapWiz and other related programs before installing version 3.6. To Begin removing the existing version - Go to Control Panel, Add/Remove Programs/ Un-Install the following: ADS Tech CapWiz V3.x CapWiz...
Page 2 2.) This is a self extracting zip file, just double click and the file will open. 3.) The CapWiz installer requires both the CapWizsetup.exe and Setup.ini files to be un-zipped in the same folder. With both files in a folder, double click CapWizsetup.exe and follow the installation steps.
Page 3 Click OK Why new Drivers? The updated drivers add stability to your capture device hardware. Specifically there was a problem that occurred when a PC went to sleep or into Hibernate mode. When the PC was brought back to normal operation the capture device was not re-detected and required cycling power to the device so it could be detected by the PC.
Page 4 CapWiz now supports all of the varieties of PAL and SECAM. This will help all of our international customers capture video from their native sources. In the Wizard Screen and also in Custom settings you can choose by country, of if your country is not listed select “Another Country”...

Capwiz 3.6.1Capwiz 3.6