Step 2. Plugging In - ADS Technologies USBAV-190 User Manual

Step 2. Plugging In:

Connect Your USB Instant VideoCD Device To Your Computer
A. Plug the USB cable on the device into the USB port on your
computer.
Note: Some computers may be equipped with USB ports on
the front of the computer tower.
B. Follow the on-screen instructions.
1) Make sure that "Install the software
automatically (Recommended)" is
selected. Click "Next".
2) Wait while Windows searches for
your device, then when found, the
"Hardware Installation" pop-up
window will appear.
Note:
This alert might appear 3-4 times
depending on your OS. Click
"Continue Anyway" to proceed.
10