Table of Contents
Advertisement
To Reset the TV SuperScan Unit:
1. Unplug Power from Unit
2. Press & Hold "Select" and "Zoom"
buttons at the same time.
3. While holding buttons, plug in power.
When red lights on, release the two
buttons.
4. If you get some output on the screen
press the "Zoom" button once more to
complete the reset procedure.
© 1998 ADS Technologies. All Rights Reserved
First Edition: Revision 1.0 April, 1998
Microsoft, MS-DOS, Windows, and Windows 95 and Windows 98 are
registered trademarks of Microsoft Corporation. IBM is a registered trade-
mark of International Business Machines, Inc.
ADS is a registered trademark of ADS Technologies Inc.
ADS Technologies (ADS) makes no warranty of any kind with regard to
this material, including but not limited to, the implied warranties of mer-
chantability and fitness for a particular purpose. The information furnished
within this written document is for information purposes only and is sub-
ject to change without notice. ADS Technologies assumes no responsi-
bility or liability for any errors or inaccuracies that may appear herein.
ADS makes no commitment to update or to keep current information
contained within this document.
Advertisement
Table of Contents
