Now you are ready to connect to your TV. You need to first check your TV to
see if it has a composite video or S-video connector. If it has both, you should you
S-video if possible. It will give you a sharper picture.
First connect the RCA cable that came in the Superscan Package to the port
labeled "Video Out" on the Superscan as show in the picture below.
Connect the remaining end, to the "RCA In" port on your TV. It may be la-
beled as "Video In" or just "Video."
First connect the S-Video cable that came in the Superscan Package to the port
labeled "S-Out" on the Superscan as show in the picture below.
Connect the remaining end, to the "S-Video In" port on your TV. It may be
labeled as "S-Video In" or just "S-Video."
If You Are Using RCA
If You Are Using S-Video
Chapter 1 - Installation Guide
13