Removing The Filter Box; Removing The Carburettor - GAS GAS 125 TXT GP 2019 Owner's Manual

Owner's Manual

Removing the filter box

Removing the carburettor

Fig. 2
To carry out any operations on the carburettor, it is advisable to remove the filter
box for better access. Follow these steps:
1. Loosen the inlet nozzle clamp.
2. Unscrew the 4 cone-shaped M6 Allen screws that secure the filter box to the
frame.
3. Pull out the filter box slightly so that the connector of the rear wiring is visible.
(Fig. 1).
4. Disconnect the connector (Fig. 2)
5. Completely remove the filter box
Fig. 2
The carburettor will be left exposed and can be removed from the engine assem-
bly by loosening the reed block pipe clamp.
Loosen the two screws on the upper cover of the carburettor so that the body is
ready for cleaning.
Take care to completely dry the inside of the carburettor. Traces of water, dirt or
other elements can enter the reed block and damage it, and consequently damage
the piston cylinder assembly.
-24-