Insert The Sd Card With Patterns - Pfaff QUILT ARTIST II Manual

Inserting the SD Card with Patterns
Before using your system, there are a few steps you need to take:
1. Locate your SD card and
plug it into Touch screen
display in the port marked
SD card.
(note: The Label on
the card faces AWAY from the
screen when inserting)
2. Once you card is inserted and your entire robotic system is setup you will HAVE to reset the
factory defaults before running. To do this:
a. Go to the Home Icon
b. Touch "Setup"
c. Go to the "Advanced" tab
d. Touch "Factory Defaults"
e. Your system has now been reset and "synced" with your remote.
14
SD Card port