Polyend Tracker Instructions Of Use page 31

Sync – on/off,
Rate – from 8 to 1/32,
Time – from 1ms to 3500ms,
Feedback – from 0 to 70,
Bit depth – sample playback rate (from 16bit to 4bit),
Limiter properties:
Attack – from 0.001 to 1s,
Release – from 0 to 0.0100s,
Threshold – from 0 to 100%,
Screen 2/3 allows control and visual monitoring of the volume in dB and adding Gain to the
individual tracks and gives access to Mute and Solo for the desired tracks. It's where it's
possible to rename tracks.
Press and hold one or more screen buttons corresponding to chosen tracks and use
Arrow keys or Jog-wheel to adjust the volume,
Use the 8 screen buttons to Mute the corresponding tracks,
Use the Shift + corresponding screen button in order to Solo the selected track.
Press the red Rec button + one of eight screen buttons corresponding to the particular
tracks in order to rename it.
Screen 3/3 allows control and visual monitoring of the volume in dB and adding Gain for
Delay, Reverb and Dry Mix. Also gives access to their Mute and Solo functions.
Press and hold one or more screen buttons corresponding to Send fx mixes and use
Arrow keys or Jog-wheel to adjust their volume,
Use the screen buttons to Mute them,
Use the Shift + corresponding screen button in order to use the Solo function,
Important:
Main Volume shortcut > Master + jog-wheel,
Shift + 1 to 8 screen button shortcut will also Mute each of 1 to 8 track in the Pattern
screen (not only from the 2/2 Master screen where Solo function works exclusively).
In the Master section – hold down more than one screen button pressed to edit more
than one corresponding value.
Reverb and Delay Send fx can be applied both on the pre and post-volume fader basis
(as a Config choice),
There are two different types of Limiter settings > Subtle or Extreme (as a Config
choice).
https://www.youtube.com/embed/8VP_2GPfRuU?feature=oembed