From Sample To Instrument; From Step To Pattern; From Pattern To Song; From Pattern To Performance - Polyend Tracker Instructions Of Use

All changes in your project are being autosaved.

From Sample to Instrument:

Capture audio using Sample Recorder > set source > set gain > record > crop > save &
load as an instrument.
Select audio files > use Sample Loader key to open SD card browser > add samples to
project instruments by copying them from the left to the right side. Set their attributes
using the Instrument Properties module.
Turn samples into wavetable/granular synthesizers or chop them in the Sample
Playback module,
Use the Sample Editor module to access instrument overview and apply renderable
lossy audio effects.

From Step to Pattern:

A step is a Note, an Instrument and two Fxs displayed as lines of colored characters,
Use Pattern module to enter sequencer screen > choose pattern number and its length.
Input/edit any step parameters > enter Edit mode with a press of the Rec key.
Input values step by step > using grid pads, jog-wheel and arrows.
Live-record pattern (Rec + Play).
To switch between step values use four color keys.
Use the Fill tool to populate tracks with steps automatically.
Step function adjusts the interval for the incremental value input.

From Pattern to Song:

Press Song key > add/del Slots with patterns for arrangement > press Play Song.
Render song to audio > Go to File > Export > choose what will be rendered.

From Pattern to Performance:

Use Perform key to tweak tracks, patterns or songs in a "live – on the fly" way.
Customise and use up to 12 Punch-in effects at the same time: turn on Edit mode >
select effects with their values per grid pad row (first is off by default, remaining three
are configurable) > using the 1 to 8 screen buttons point the tracks which will be
affected > use effect corresponding pad rows with set values to perform.
Mix selected tracks from different patterns: hold the screen button + up/down arrow
keys > remix tracks from different patterns.
Shift + 1-8 screen button shortcut mutes each of 1-8 track in the Pattern screen. The
same is possible in the Master section with add of track Solo + visual track volume