Keyboard M Enu C Ontrol; Parameter S Etup; Joystick C Alibration; Camera S Etup - Security Tronix ST-PTZMINI-KB User Manual

KEYBOARD M ENU C ONTROL:
Parameter S etup
Joystick C alibration
Camera S etup
Camera S can S etup
Camera P attern S etup
Camera T our S etup
Protocol S etup
Pelco M atrix M odel S etup
By pressing and holding the MENU key for 2 seconds the main menu screen (as above)
will appear. The user must enter the main menu and either use the menu item number or
joystick to select the desired menu item. Once done, move the joystick right or press
ENTER to enter that menu.
To move to a previous menu item press the PREV key or move the joystick left.
To save a menu setting selection press the ENTER key. The LCD screen will then display
"Success".
Keyboard Parameter Settings: Keyboard Camera ID Setup; Keyboard Baud Rate
Setup; Keyboard Information Display.
 Keyboard Camera ID Setup:
o
Press the 1 key for Set KB ID. Press 1 again and the LCD screen will display:
o
o
o
v1.0 6/21/11
1. Keyboard Setup
2. Dome Setup
3. Protocol Select
4. Exit Menu
Press the MENU key and select 1. Keyboard Setup from the main menu.
The Keyboard Setup Menu screen similar to the one below will appear.
1. Set KB ID (1-64):
2. Set Baudrate: 2400bps
3. Joy Calibrate
4. About Keyboard
1. Set KB ID (1-64):
Press 1 to select the keyboard ID setting. Use the numeric keys to select
the ID from 1 to 64 (if the selected ID is greater than 64 "Error" will be
displayed). Then press the ENTER key to save. Upon doing so "Success"
will appear on the screen.
To move to the previous menu press the PREV key or move the joystick
to the left.
NOTE: The keyboard ID default is 1.
9