LaserLiner CompactLine-Laser G360 Manual page 15

How the tilt function works
On
Automatic level
set-up phase
Green laser technology
Laser modules in DLD design stand for high line quality as well
as a clean and clear and therefore easily visible line image.
Unlike previous generations they are more temperature-stable
and energy efficient.
Furthermore, the human eye has a higher sensitivity to the
wave range of the green laser than the red laser, for example.
This makes the green laser diode appear much brighter than
the red one.
Green lasers, especially in the DLD design, thus offer advantages
with regards to how visible the laser line is under unfavourable
conditions.
Approx. 6 times brighter than a typical red laser with 630 - 660 nm
Number and direction
of the lasers
H = horizontal laser
V = vertical laser
S = slope function
Tilt active after 20 seconds,
rapid flashing of the tilt LED.
Enabling the tilt
function: press the
tilt button; the tilt
LED flashes every
second.
CompactLine-Laser G360
1H360° 1V
External
influence
The
laser
flashes, the tilt LED
lights up continuously
and a signal sounds.
S
15
EN