Advertisement
Configuration Menu
Function
Power Con-
Normal, ECO
sumption
Auto Iris
Off, Normal, High Speed
Reset
Yes, No
*
Settings are saved for each type of input source or Color Mode.
Signal menu
Function
3D Setup
3D Display
3D Format
3D Depth
Diagonal Screen
Size
3D Brightness
Inverse 3D Glasses
3D Viewing Notice
*1
Aspect
Auto
*1
Auto, Off, 4%, and 8%
Overscan
Menu/Settings
Menu/Settings
Auto, 3D, 2D
Side by Side, Top
and Bottom
-10 to 10
60 to 300
Low, Medium, High Sets the brightness for the 3D image.
On, Off
*2
, Normal, Full, Zoom
You can set the lamp brightness to one of
two settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image.
Resets the adjustment values of Image set
in the current Color Mode to the default
settings.
To view 3D images, set this to Auto or
3D.
p.44
s
Sets the 3D format for the input signal.
Sets the depth for the 3D image.
Sets the projection size for the 3D image. By
matching this to the actual size, you can achieve
the optimum 3D effect.
Reverses the synchronization timing for the left/
right shutters on the 3D Glasses and the left/right
images. Enable this function if the 3D effect is not
displayed correctly.
Turns on or off the notification that is displayed
when viewing 3D content.
Selects the aspect mode.
Changes the output image ratio (the range of the
projected image).
•
Off, 4%, 8%: Sets the range of the image. When
set to Off, the entire range of the image is pro-
jected. Depending on the image signal, you may
notice noise at the top and bottom of the image.
•
Auto: Automatically sets to Off or 8% depend-
ing on the input signal.
51
Explanation
p.35
s
Explanation
p.33
s
Advertisement
