Advertisement
Adjusting the Image
Adjusting Image Resolution (Image Enhancement)
You can adjust the resolution of the image using the Image Enhancement function.
The following contents can be adjusted.
Image Preset Mode
*1 *2
Noise Reduction
MPEG Noise Reduction
Detail Enhancement
*1
This can only be set when Signal - Advanced- Image Processing is set to Fine.
*2
This can be set at any time except when Image Preset Mode is set to Off.
a
Press the [Menu] button to display
menus in the order Image - Image
Enhancement.
Remote control
b
Use the up and down buttons to select
the item you want to adjust, and then
press the [Enter] button to confirm the
selection.
Setting Auto Iris
By automatically setting the luminance according to the displayed image, you can enjoy deep and rich images.
You can select the luminance adjustment tracking for changes in brightness in the displayed image from
Normal to High Speed.
Select the settings prepared in advance as the settings for Noise Re-
duction, MPEG Noise Reduction, and Detail Enhancement.
Smoothes out rough images.
*1 *2
Reduces dot and block noise that occurs in outlines when projecting
MPEG movies.
*2
Enhances the contrast in an image to create a more emphatic texture
and material feel.
Control panel
c
Use the left and right buttons to make
adjustments.
Press the [Esc] button to adjust another
item.
d
Press the [Menu] button to exit the
menu.
35
Advertisement
