Table of Contents
Advertisement
DR-770
3. Use [DEC] [INC] or [VALUE] to select the type of data that
will be transmitted.
ALL:
All data of the DR-770
SEQ:
All patterns and songs
GLOBAL: DPP/roll/metronome/MIDI settings
DRMKITS: All user drum kits
1DRMKIT: A specified individual drum kit (If this data is
transmitted to the DR-770, the drum kit that is
currently selected on the receiving device will
change to the drum kit settings that were
received.)
4. Press [ENTER].
The display will ask "Sure?," allowing you to confirm whether
you really want to execute the bulk dump.
If you selected "1DRMKIT," use [DEC] [INC] or [VALUE] to
select the drum kit whose data you want to transmit.
5. To execute the bulk dump, press [ENTER].
The display will indicate "Trnsmit" (transmitting) ' "Done,"
and the bulk dump will be completed.
If you decide to cancel, press [STOP/EXIT].
The bulk dump will be canceled, and the display will indicate
"Aborted."
QUANTIZE
BEAT
NEXT PTN
LENGTH
PATTERN
PART
How to load the User Data
Connections
MIDI OUT
MIDI sequencer
Computer
etc.
Transmit device
Connections
1. Press [MIDI] to make "MIDI" light.
The DR-770 is now in MIDI mode.
2. Use [
] [
] to select "2 MIDIch."
3. Use [VALUE*] to select the MIDI channel.
If you want to restore data that was formetly transmitted to a
sequencer, set the unit to the same MIDI channel that was used
when transmitting the data.
If you want to receive data that being transmittied from another
DR-770, set both DR-770 units to the same MIDI channel.
4. Use [
] [
] to select "7 RxEXC."
MODE
SONG
PATTERN
PAD
UTILITY
QUANTIZE
NEXT PTN
PART
5. Use [DEC] [INC] or [VALUE] to turn the setting "ON."
With playback stopped on the DR-770, receive the data.
Feb. 1999
MIDI IN
MODE
FUNC
PAD BANK
Receive device (DR-770)
FUNC
REAL
INSERT
STEP
COPY
EFFECTS
DELETE
MIDI
BEAT
LENGTH
PATTERN
7
Advertisement
Table of Contents
