Table of Contents
Advertisement
Switching on the fan run-on
During the fan run-on, the appliance
continues to run for a short time and
then switches off automatically.
Switch on fan setting 1, 2 or 3.
1.
Press
.
2.
a The LED for the fan run-on and the
set fan setting light up in the LED
display.
a The appliance switches off auto-
matically after approx. 10 minutes.
Switching off the fan run-on
Press
.
▶
a The fan run-on mode is then pre-
maturely ended and the fan contin-
ues at the selected fan setting.
a The LED for the set fan level lights
up in the LED display, but the LED
for the fan run-on no longer lights
up.
Switching on the lighting
The lighting can be switched on and
off independently of the ventilation
system.
Press
to switch on the lighting.
▶
Setting the brightness
Press and hold .
▶
Switching off the lighting
Switch off the lighting with .
▶
Cleaning and servicing en
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning products
You can obtain suitable cleaning
products from after-sales service or
the online shop.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use harsh or abrasive de-
▶
tergents.
Do not use cleaning products with
▶
a high alcohol content.
Do not use hard scouring pads or
▶
cleaning sponges.
Do not use any special cleaners
▶
for cleaning the appliance while it
is hot.
Do not use limescale remover on
▶
the door handle or control panel,
as it may leave permanent stain-
ing.
Only use glass cleaners, glass
▶
scrapers or stainless steel care
products if recommended in the
cleaning instructions for the relev-
ant part.
Wash sponge cloths thoroughly
▶
before use.
13
Advertisement
Table of Contents
