Suncast Homeplace Octagon Vinyl Gazebo Assembly Instructions Manual page 9

Step 13: Center double joist along edge of center board and attach using 3" screws.
Note: There may be some space between joist and connecting plate, but it should not
exceed 1/4".
Step 14: Repeat step 13 for each of the remaining double joists trying to keep an equal space between
the joist and connecting plate for each board.
Floor is now ready for installation of middle joists.
Incorrect angle alignment
Step 15: Locate the 16 middle 16: Place one middle joist in each floor section.
floor joists.
Note: Make sure to properly align cut angles of joist.
© Suncast Corporation
page 04