Introduction; Ipoint X And System Description - IDENTEC SOLUTIONS iPOINT X Hardware User Manual

iPOINT X – Hardware User Manual | 18.06.2020

2. Introduction

2.1

iPOINT X and System Description

The iPOINT X device provides a functional ATEX/IECEx certified combination of: The "zone location" system of an
i-MARK, the long-range Reader functionality of an i-PORT as well as close proximity NFC functionality, encased in
an attractive, rugged, IP67 housing.
The Housing contains:
- 5 Status LEDs (see Section 3.1)
- a Connection Chamber where the wired interfaces can be accessed
- Relevant cable glands, as wired access points, depending on the device setup
- Mounting Plate and securing screw (see Section 4)
For a detailed description of how to correctly open the connection chamber and other mechanical information,
please refer to Section 4.1.
The iPOINT X can used as a standalone device or with an interface to an access controller. See Section 2.3 for
more details.
Following is a description of the wireless technologies that are available within the iPOINT X Device.
Copyright © 2020 IDENTEC SOLUTIONS. All rights reserved.
8