Mounting Options - IDENTEC SOLUTIONS iPOINT X Hardware User Manual

iPOINT X – Hardware User Manual | 18.06.2020
4.2

Mounting Options

The mounting plate can be attached to a wall, pole mount bracket, extension bracket or DIN rail. There are 4 fixing
holes for attaching the relevant bracket or screwing to a wall.
For mounting with a pole mount bracket or extension bracket, please see relevant Installation guides provided with
the kits.
For Direct wall mounting, using the mounting plate only, 4x countersunk screws are required with a maximum
diameter of 5mm or M5 screws. Length and type shall be chosen depending on wall material.
Warning: Don't screw the mounting plate directly to a metal surface that extends the size of the whole device. This
will have an influence on the UHF and LF performance. If a metal fixing surface is required, please use the extension
bracket as a standoff.
Copyright © 2020 IDENTEC SOLUTIONS. All rights reserved.

4x countersunk screws

Choose screw type and length depending on wall
material

Maximum diameter of 5mm

Screw plate securely to the wall using all 4 screws

the iPOINT X device can then be clipped onto the
plate and secured with the securing screw
Wall
19