Mechanical Information & Installation; Opening The Connection Chamber - IDENTEC SOLUTIONS iPOINT X Hardware User Manual

iPOINT X – Hardware User Manual | 18.06.2020
4. Mechanical Information & Installation
4.1

Opening the connection Chamber

1. Lift up the cover using thumbs from the front side until magnetic connection is released, lift off.
2. Loosen the 8x screws, be aware, DO NOT pull out the screws out completely, the gasket can be damaged.
3. Lift off the lid.
4. Now you have access to the Connection Chamber
Note: when replacing the lid, be sure that the sealing gasket is correctly in place.
Note: The rest of the housing cannot be accessed. There is no settings or modifications to be made there.
Copyright © 2020 IDENTEC SOLUTIONS. All rights reserved.
Housing Dimensions
18