Running The Setup Wizard; Accessing The Wizard - 3Com OfficeConnect 3CRWE454G72 User Manual

3
Accessing the
Wizard
R
UNNING THE
3Com recommends that you perform the initial Access Point
configuration from a computer that is directly connected to the LAN port
and not from a wireless connection.
However, you may configure the Access Point from a wireless admin
computer but, note that you may lose contact with the Access Point if
you change the wireless configuration. To communicate with the Access
Point, your wireless NIC should be set as follows:
Encryption — none
Service Area Name/SSID — 3Com
The Access Point setup program is Web-based, which means that it is
accessed through your Web browser (Netscape Navigator, Internet
Explorer or Mozilla).
To use the Setup Wizard:
1 Ensure that you have at least one computer connected to the Access
Point. Refer to Chapter 2
2 Insert the Access Point CD-ROM in the CD-ROM drive on your computer.
A menu will appear; select Discovery.
Discovery will find the Access Point even if it is unconfigured or
misconfigured.
S W
ETUP
for details on how to do this.
IZARD