Remove the camera
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 38
"Remove the hinge cover" on page 41
"Remove the LCD bezel" on page 41
"Remove the hinges" on page 42
"Remove the LCD panel" on page 42
Step 1.
Disconnect the camera cable from the camera board and then remove the camera.
Figure 31. Disconnect the camera cable from the camera board and then remove the camera
Go to
https://support.lenovo.com/partslookup
replacement parts:
Camera
Removable tape
Remove the camera cable
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 38
"Remove the hinge cover" on page 41
"Remove the LCD bezel" on page 41
"Remove the hinges" on page 42
"Remove the LCD panel" on page 42
Step 1.
Disconnect the camera cable and EDP cable from the camera board. Remove the camera cable.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
45