Remove The Fan; Remove The Speakers - Lenovo IdeaPad Slim 5i Pro Hardware Maintenance Manual

Screw specifications
M2.0 x L4.0
Go to https://support.lenovo.com/partslookup
part:
Heat sink

Remove the fan

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Disconnect the fan cable from the system board and then release the fan cable from the cable
guide. Remove two screws and then remove the fan.
Figure 11. Disconnect the fan cable from the system board and then release the fan cable from the cable
guide. Remove two screws and then remove the fan
Screw specifications
M2.0 x L4.0
Go to
https://support.lenovo.com/partslookup
part:
Fan

Remove the speakers

Make sure the following FRU (CRU) has been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Number of screws
5
to look up the Lenovo part number of the following replacement
Number of screws
2
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
33