Remove The I/O Board - Lenovo IdeaPad Slim 5i Pro Hardware Maintenance Manual

USB Type-C bracket

Remove the I/O board

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove three screws and then open the hinge.
Figure 14. Remove three screws and then open the hinge
Screw specifications
M2.5 x L4.0
Step 3. Disconnect the I/O board cable from the I/O board. Remove one screw and then remove the I/O
board.
Figure 15. Disconnect the I/O board cable from the I/O board. Remove one screw and then remove the I/O
board
Number of screws
3
.
Chapter 4 Removing a FRU or CRU
35