3Com OfficeConnect 3C886A Release Note page 15

Configuring the
Server-side Dial-in
User Parameters Page
Once you have chosen a dial-in scenario that best fits your dial-in criteria, you are
ready to create a dial-in user profile. Refer to "Create a Dial-In User Profile Using
the Dial-In Wizard" or "Configuring the Server-side Dial-in User Parameters Page"
to manually create or further define Dial-in users.
Once the Dial-in Wizard has created a Dial-in User account profile, you can further
define the dial-in user parameters or manually create a new Dial-in user via the
Dial-in User Parameters page.
You can create a total of ten dial-in user profiles. If you have created ten profiles
and would like to add a new user, you must delete one profile before adding a
new one.
To access Dial-in User profiles, do the following.
1 Click the Dial-in Users button.
The Dial-in User Selection screen opens, as shown in Figure 8.
Figure 8 Dial-in User Selection Screen
2 Choose either New Dial-in User to manually create a new profile or choose an
existing Dial-in User from the drop-down list and click Select.
The Dial-in User Parameters screen opens, as shown in Figure 9.
Configuring the Server-side Dial-in User Parameters Page 15